|
 | Need Help Quintum Configuration | |  |
|
 |
|
-
Our entry level VoIP calculator allowing you to easily calculate your Voice over
IP bandwidth requirements.
Available for immediate download at only 99 US Dollars.
|
|
-
Design and use your own VoIP calculators using drag and drop techniques.
We used this software to design our own VoIP calling
service. Now, we offer it for everyone to use.
|
|
-
Simplifies the complicated design process involved in creating effective voice
networks.
Support both traditional circuit switching techniques and Voice over IP.
|
|
|
| | MikeM to Asep - 17 Feb 2010 | | |
|
Posted on www.erlang.com
Asep,
If you would like me to work with you on the config, please contact me directly at mike_voip@hotmail.com. I would need to get much more information to understand your full need and then discuss my services.
thanks
Mike M
mike_voip@hotmail.com |
|
Posted on www.voip-calculator.com
Hi John or Mike,
I wil focus first to my first question.
1. Between Quintum 1 & 2 can do call only by extension dial (i.e: when phoneFXS #1 from Quintum-1 being pickup and then phoneFXS #1 from Quintum-2 will automatically Ringing).
John said, you can do force route
via telnet you
config-LineCircuitRoutingGroup-1# frn 5551111.
the 5551111 is the assign number of your FxS
I already set all FXS ports & DN in both side of my quintum but still got error for call. Can you tell me step by step the configuration ?
Regards,
Asep |
|
Posted on www.voip-calculator.com
Hi Asep,
Good day,
kindly give the exact model of quintum so that we can give you advise.
with your requirments you need the AXM series.
1. Between Quintum 1 & 2 can do call only by extension dial (i.e: when phone #1 from Quintum 1 being pickup and then phone #1 from Quintum #2 will automatically Ringing).
- you can do force route
via telnet you
config-LineCircuitRoutingGroup-1# frn 5551111.
the 5551111 is the assign number of your FxS
2. In Quintum 1, I plug channelbank to FXO port for GSM Call purpose.
-in this scenario you may assign HopoffNumberDirectory dialling pattern.
3. for PSTN calls, I plan to route to local VOIP provider.
-yes it can connect with VoIP Providers, but as mike says "there are many ways to do what you want, all depends on the specifics."
best regards,
John
tech.john@hotmail.com |
| | MikeM to Asep - 6 Jan 2010 | | |
|
Posted on www.erlang.com
Asep,
The first problem is that you are using the FXO ports on the quintum which do not support connection direct to a phone and do not work that way. If you are trying to connect phones from one office to another, you will really need to use the FXS ports (if your quintum has these port active).
I would need to discuss this directly as there are many ways to do what you want, all depends on the specifics.
Please contact me at mike_voip@hotmail.com.
Mike |
|
Posted on www.voip-calculator.com
Hi All,
I Have 2 unit Quintum AX800 and 1 Unit GSM Channelbank 8 port.
My scheme are :
1. Between Quintum 1 & 2 can do call only by extension dial (i.e: when phone #1 from Quintum 1 being pickup and then phone #1 from Quintum #2 will automatically Ringing).
2. In Quintum 1, I plug channelbank to FXO port for GSM Call purpose.
3. for PSTN calls, I plan to route to local VOIP provider
Hopefully those scheme above are possible :)
Regards,
Asep |
|
 |
Post a reply to this article
|
|
|
|
|
|
