|
|
 |
|
-
Our entry level VoIP calculator allowing you to easily calculate your Voice over
IP bandwidth requirements.
Available for immediate download at only 99 US Dollars.
|
|
-
Design and use your own VoIP calculators using drag and drop techniques.
We used this software to design our own VoIP calling
service. Now, we offer it for everyone to use.
|
|
-
Simplifies the complicated design process involved in creating effective voice
networks.
Support both traditional circuit switching techniques and Voice over IP.
|
|
|
 |  | John to George - 28 Jan 2010 | | |
|
Posted on www.voip-calculator.com
Hi,
1. I want that incoming (PSTN FXO) calls to be able to go only to FXS port 1. I already configured it like this: TCRG and LCRG, pass through: enabled, block of channels, and incoming call goes to port 1. Is it enough? If have better solution, please tell me.
--- you can do force route instead.
2. I need to be able to transfer incoming calls (from FXO and FXS) to other number (Which is already configured in the gateway). for example I need first call to transfer to xxxx01, second call I need to transfer to xxxx02. I configured unattended transfer but, could not made any transfer. May be there is another way or unattended transfer more complex configuration.
--- This is a PBX feature. Quintum cant transfer call from fxs to another fxs in one box.
3. Also, if I need to use two or more Tenors, how I configure FXO port. for example in first Tenor I plug PSTN line to FXO-one, how I configure it for second Tenor.
--- well you can do is example in 1st quintum assign 9 the other is 8.
best regards,
John Simon |
|
Posted on www.voip-calculator.com
Hello!
I need some help with quintum cofiguration.
I have Tenor AXE2400 with 24 FXS and 2 FXO.
1. I want that incoming (PSTN FXO) calls to be able to go only to FXS port 1. I already configured it like this: TCRG and LCRG, pass through: enabled, block of channels, and incoming call goes to port 1. Is it enough? If have better solution, please tell me.
2. I need to be able to transfer incoming calls (from FXO and FXS) to other number (Which is already configured in the gateway). for example I need first call to transfer to xxxx01, second call I need to transfer to xxxx02. I configured unattended transfer but, could not made any transfer. May be there is another way or unattended transfer more complex configuration.
3. Also, if I need to use two or more Tenors, how I configure FXO port. for example in first Tenor I plug PSTN line to FXO-one, how I configure it for second Tenor.
Please help me to solve this issue.
Thank You |
|
Hi ppl!
Anybody know how to get count of online users using SNMP on Quidway A8010 Expert?
Thank you! |
|
we achieve many services (DID callack, WEBtrigger,....), when i was tried to pass a DID callback throught E1 trunk, the leg A of the call succeded, but when i received the request on the redirect number (legB),I answered and i entered the destination, but here and on the gateway log i sot that the destination number entered is incorrect.
for example i entered 9613216771 on the gateway log displayed as 96612216677711.
so please can somene help me?
thank you |
|
Dear all,
I havesame proble of Mr Gulzar
i have A800 and need make call to it from netmeeting.
but when send the call it reject after 5 or 6 second .
how i can sove this problem?
Note : i open my ip in tenor and use valid LAM pattern. |
| | www.blue-lava.co.uk - 31 Mar 2004 | | |
|
Hi Gulzar,
The Welltech gateways support H.450 services including call transfer. They also support dynamic CODEC negotiation so all those horrible CODEC mismatch issues are a thing of the past.
To make things even better they are H.323 and SIP compliant and under half the price of a Quintum equivalent.
Hope this helps
Mat Hitchcock
mhitchcock@blue-lava.co.uk |
|
Looking for a configuration to use with my Mediatrix APA III-4FXS running H.323 on a calling card plateform.
The calling card plateform uses a quitum A800; dial an access number, PIN then destination number.
There IP connectivity between the Mediatrix and the quintum. |
| | Gulzar Hussain - 6 Feb 2004 | | |
|
| I wanna know about Huawei Quidway A8010 Mini Expert |
| | voiphelp.net - 3 Feb 2004 | | |
|
Hello Gulzar,
Sorry for the delay, you may want to confirm that this is the supplementary service that gnugk is trying to use. The H.323 Mediatrix products support both H.450.2 Call transfer and H.450.3 call diversion.
support@voiphelp.net |
| | Gulzar Hussain - 31 Jan 2004 | | |
|
Waiting for the answer from somebody
Does Huawei Quidway A8010 Mini Expert support H.450.2 Call Transfer ? |
|
|
|
 |
Post a reply to this article
|
|
|
|
|
|
