|
|
 |
|
-
Our entry level VoIP calculator allowing you to easily calculate your Voice over
IP bandwidth requirements.
Available for immediate download at only 99 US Dollars.
|
|
-
Design and use your own VoIP calculators using drag and drop techniques.
We used this software to design our own VoIP calling
service. Now, we offer it for everyone to use.
|
|
-
Simplifies the complicated design process involved in creating effective voice
networks.
Support both traditional circuit switching techniques and Voice over IP.
|
|
|
|
| SD Drop must be less than 1.5;if SD drop greater than 1.5 then give tilt (electrical and mechanical) and take drive around the site |
|
SDCCH DROP:
1, Shift the BCCH to another TRX ( within the sector ) which is having a good DL quality.
2, Increase the TRX signalling viz., 16kpbs to 32 kpbs.
3, Look for freq changes if u r having co-channel interference.
4, Increase the T2000S timer value. |
|
| How to rectify SD drop ? |
|
 |
Post a reply to this article
|
|
|
|
| Posts to this forum are charged at 4.95 Pounds Sterling per article or
reply.
|
